Lab Instrumentation — question 1 of 10
Write a real answer. It is graded against the question's rubric, and the mastery movement is computed by the same engine the product uses. Scoring here is deterministic rather than model-written, so this page costs nothing to run and nothing is saved. In a track built from your own posting, the same rubric is graded by the model, which is what produces feedback about your reasoning rather than about coverage.
You're asked to measure the resistance of a resistor that's still soldered onto a populated circuit board. Your DMM reads 340 ohms, but the resistor is marked 1 kilohm (brown-black-red). What's most likely going on, and how would you get a trustworthy reading?